|
Cation Polyacrylamide is technically named Polyacrylamide, which is a water soluble macromolecular polymer. It is insoluble in most of the organic solvents. It generates a good flocculation and can decrease the resistance between liquids
MOLECULAR WEIGHT
C3H5NO 71.07
CAS NO
9003-05-8
APPLICATION FIELD
1.It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2.It can also be used to treat industrial wastewater and life sewage water.
3.It can be used for papermaking to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
SPECIFICATIONS
|
Item
|
Cationic type
|
|
Appearance
|
white fine-sand shaped powder or colorless transparent colloid
|
|
Molecular weight
|
8million~10million
|
|
Ionicity
|
0~100%
|
APPLICATION METHODS
1.The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2.The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60 ).
3.The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
.PACKAGE AND STORAGE
1.The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product can be packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.
2.This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35 .
3.The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.
|
textile auxiliaries
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian